Cisco Cisco Packet Data Gateway (PDG)
aaa constructed-nai
This command configures the password used during authentication for sessions using a Constructed Network
Access Identifier (NAI) or an APN-specified user name.
Access Identifier (NAI) or an APN-specified user name.
Product
PDSN
GGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-ctx)#
Syntax Description
aaa constructed-nai authentication [ [ encrypted ] password user_password | use-shared-secret-password
]
no aaa constructed-nai authentication
no
Disables authentication based upon the constructed NAI.
[ encrypted ] password user_password
encrypted: Specifies that the user password should be encrypted.
password user_password: Specifies an authentication password for the NAI-constructed user.
In 12.1 and earlier releases, the user_password must be an alphanumeric string of 0 through 63 characters
with or without encryption.
with or without encryption.
In 12.2 and later releases, the user_password must be an alphanumeric string of 0 through 63 characters
without encryption, or 1 through 132 characters with encryption.
without encryption, or 1 through 132 characters with encryption.
use-shared-secret-password
Specifies using RADIUS shared secret as the password. Default: No password
Usage Guidelines
This command configures passwords for user sessions that utilize a constructed NAI assigned via a PDSN
service or a user name assigned via the APN configuration.
service or a user name assigned via the APN configuration.
Command Line Interface Reference, Modes C - D, StarOS Release 19
476
Context Configuration Mode Commands A-D
aaa constructed-nai