Cisco Cisco Packet Data Gateway (PDG)
radius accounting apn-to-be-included
This command configures the Access Point Name (APN) to be included for RADIUS accounting.
Product
GGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-ctx)#
Syntax Description
radius accounting apn-to-be-included { gi | gn }
default radius accounting apn-to-be-included
default radius accounting apn-to-be-included
default
Configures the default setting.
gi
Specifies the usage of the Gi APN name in the RADIUS accounting request. The Gi APN represents the APN
received in the Create PDP context request message from the SGSN.
received in the Create PDP context request message from the SGSN.
gn
Specifies the usage of the Gn APN name in the RADIUS accounting request. The Gn APN represents the
APN selected by the GGSN.
APN selected by the GGSN.
Usage Guidelines
Use this command to configure the APN name for RADIUS Accounting. This can be set to either gi or gn.
Examples
The following command specifies the usage of Gn APN name in the RADIUS accounting request:
radius accounting apn-to-be-included gn
radius accounting apn-to-be-included gn
Command Line Interface Reference, Modes C - D, StarOS Release 19
864
Context Configuration Mode Commands N-R
radius accounting apn-to-be-included