Cisco Cisco Packet Data Gateway (PDG)
radius authenticate apn-to-be-included
This command configures the Access Point Name (APN) to be included for RADIUS authentication.
Product
GGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-ctx)#
Syntax Description
[ default ] radius authenticate apn-to-be-included { gi | gn }
default
Configures the default setting.
gi
Specifies the use of the Gi APN name in the RADIUS authentication request. The Gi APN represents the
APN received in the Create PDP Context Request message from the SGSN.
APN received in the Create PDP Context Request message from the SGSN.
gn
Specifies the use of the Gn APN name in the RADIUS authentication request. The Gn APN represents the
APN selected by the GGSN.
APN selected by the GGSN.
Usage Guidelines
Use this command to configure the APN name for RADIUS authentication. This can be set to either gi or gn.
Examples
The following command specifies the usage of Gn APN name in the RADIUS authentication request.
radius authenticate apn-to-be-included gn
radius authenticate apn-to-be-included gn
Command Line Interface Reference, Modes C - D, StarOS Release 19
888
Context Configuration Mode Commands N-R
radius authenticate apn-to-be-included