Cisco Cisco Packet Data Gateway (PDG)
radius keepalive
This command configures the keepalive authentication parameters for the RADIUS server.
Product
All
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-ctx)#
Syntax Description
radius keepalive [ calling-station-id id | consecutive-response responses_no_of | encrypted | interval
interval_duration | password | retries retries_no_of | timeout timeout_duration | username user_name |
valid-response access-accept [ access-reject ] ]
default radius keepalive { calling-station-id | consecutive-response | interval | password | retries | timeout
interval_duration | password | retries retries_no_of | timeout timeout_duration | username user_name |
valid-response access-accept [ access-reject ] ]
default radius keepalive { calling-station-id | consecutive-response | interval | password | retries | timeout
| username | valid-response }
default
Configures the default setting for the specified parameter.
calling-station-id id
Configures the Calling-Station ID to be used for the keepalive authentication. id must bean alphanumeric
string of size 1 to 15 characters. Default: 000000000000000
string of size 1 to 15 characters. Default: 000000000000000
consecutive-response responses_no_of
Configures the number of consecutive authentication responses after which the server is marked as reachable.
responses_no_of must be an integer from 1 through 10. Default: 1
responses_no_of must be an integer from 1 through 10. Default: 1
The keepalive request is tried every 0.5 seconds (non-configurable) to mark the server as up.
Important
In this case (for keepalive approach) "radius deadtime"' parameter is not applicable.
Important
Command Line Interface Reference, Modes C - D, StarOS Release 19
911
Context Configuration Mode Commands N-R
radius keepalive