Cisco Cisco Packet Data Gateway (PDG)
snmp trap
Enables or disables the SNMP trap for S1 interface connection establishment.
Product
MME
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-mme-service)#
Syntax Description
[ default | no ] snmp trap { s1-initial-establishment | s1-path-establishment }
default
Returns the command to its default setting of disabled.
no
Disables the SNMP trap.
s1-initial-establishment
Specifies that the SNMP trap for the initial S1 interface connection establishment is to be enabled or disabled.
s1-path-establishment
Specifies that the SNMP trap for the S1 path establishment is to be enabled or disabled.
Usage Guidelines
Use this command to enable or disabled the SNMP trap for S1 interface connection establishment.
Command Line Interface Reference, Modes I - Q, StarOS Release 19
1000
MME Service Configuration Mode Commands
snmp trap