Cisco Cisco Packet Data Gateway (PDG)
service-tag
This command sets an action to activate/deactivate a pre-configured Service Tag rule in PCC-Action-Set
configuration for PCC-Service instance.
configuration for PCC-Service instance.
Product
IPCF
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > PCC Service Configuration > PCC Action-Set
Configuration
Configuration
configure > context context_name > pcc-service service_name > action-set action_set_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-pcc-action-set)#
Syntax Description
[
no
]
service-tag svc_tag
{
activate-rule
|
activate-rule
}
no
Removes the action to activate/deactivate a pre-configured Service Tag rule in PCC-Action-Set configuration
for PCC-Service instance.
for PCC-Service instance.
svc_tag
Specifies the name of the pre-configured Service Tag rule for an activation/deactivation is set under
PCC-Action-Set configuration instance for PCC-Service configuration.
PCC-Action-Set configuration instance for PCC-Service configuration.
svc_tag is a pre-configured Service Tag name.
activate-rule
Specifies that action to be set for Service Tag activation rule under PCC-Action-Set configuration instance
for PCC-Service configuration.
for PCC-Service configuration.
deactivate-rule
Specifies that action to be set for Service Tag deactivation rule under PCC-Action-Set configuration instance
for PCC-Service configuration.
for PCC-Service configuration.
Usage Guidelines
Use this command to set an action to activate/deactivate a pre-configured Service Tag rule in PCC-Action-Set
configuration for PCC-Service instance.
configuration for PCC-Service instance.
Command Line Interface Reference, Modes I - Q, StarOS Release 19
1253
PCC-Action-Set Configuration Mode Commands
service-tag