Cisco Cisco Packet Data Gateway (PDG)
airlink bad-sequence-number
Configures PDSN behavior for airlink related parameters.
Product
PDSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > PDSN Service Configuration
configure > context context_name > pdsn-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-pdsn-service)#
airlink bad-sequence-number
{
accept
|
deny
[
use-deny-code
{
poorly-formed-request
|
unsupported-vendor-id
}]}
[
no
|
default
]
airlinkbad-sequence-number
no
Disables the deny of bad-sequence number and accept it.
default
It is the default behavior.
accept
Accepts the A11 RRQ messages that have an Airlink Sequence number less than or equal to a previously
received sequence number.
received sequence number.
It is the default behavior.
deny
Rejects the A11 RRQ messages that have an Airlink Sequence number less than or equal to a previously
received sequence number.
received sequence number.
It uses poorly-formed-request option by default to deny a request.
use-deny-code { poorly-formed-request | unsupported-vendor-id }
These are optional keywords that used with deny sub-command to deny the A11 RRQ messages that have
either an unsupported vendor Id or A11 Requests with bad/poor formation.
either an unsupported vendor Id or A11 Requests with bad/poor formation.
unsupported-vendor-id denies request on the basis of vendor Id.
Command Line Interface Reference, Modes I - Q, StarOS Release 19
1539
PDSN Service Configuration Mode Commands
airlink bad-sequence-number