Cisco Cisco Packet Data Gateway (PDG)

Pagina di 1868
authentication
Configures authentication parameters for specific PDSN service.
Product
PDSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > PDSN Service Configuration
configure > context context_name > pdsn-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-pdsn-service)#
Syntax Description
authentication
{ [
allow-noauth
] [
chap chap_priority
] [
mschap mschap_priority
] [
pap
pap_priority
] } | [
msid-auth
]
default authentication
default
Configures authentication parameters for specific PDSN service.
allow-noauth
Default: Disabled
This option configures the system to provide subscribers with network access even though they have not been
authenticated. This command issued by itself would cause the system to not attempt to authenticate subscribers.
When the allow-noauth option is used in conjunction with commands specifying other authentication protocols
and priorities to use, then if attempts to use those protocols fail, the system will treat the allow-noauth option
as the lowest priority.
If no authentication is allowed, then NAI construct will be implemented in order to provide accounting records
for the subscriber.
chap chap_priority
Default: 1
This option configures the system to attempt to use the Challenge Handshake Authentication Protocol (CHAP)
to authenticate the subscriber.
chap_priority must be specified in conjunction with this option. Priorities specify which authentication
protocol should be attempted first, second, third and so on.
   Command Line Interface Reference, Modes I - Q, StarOS Release 19
1544
PDSN Service Configuration Mode Commands
authentication