Cisco Cisco Packet Data Gateway (PDG)
cid-mode
Enters the RoHC Profile Compression Options Configuration mode.and configures options that apply during
RoHC compression for the current RoHC profile.
RoHC compression for the current RoHC profile.
Product
PDSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > PDSN Service Configuration > PDSN Service ROHC
configure > context context_name > pdsn-service service_name > ip header-compression rohc
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-ip-header-compression-rohc)#
Syntax Description
cid-mode { large | small } max-cid integer
default cid-mode
default cid-mode
default
Reset all options in the RoHC Profile Compression Configuration mode to their default values.
large
Use large packets with optional information for RoHC
small
This is the default packet size.
Use small RoHC packets.
max-cid integer
Default: 15
The highest context ID number to be used by the compressor. integer must be an integer from 0 through 15
when small packet size is selected and must be an integer from 0 through 31 when large packet size is selected.
when small packet size is selected and must be an integer from 0 through 31 when large packet size is selected.
Usage Guidelines
Use this command to set the RoHC packet size and define the maximum
Command Line Interface Reference, Modes I - Q, StarOS Release 19
1626
PDSN Service RoHC Configuration Mode Commands
cid-mode