Cisco Cisco Packet Data Gateway (PDG)
psp
Creates the peer-server-process (PSP) instance and enters the PSP configuration mode. See the PSP
Configuration Mode chapter in this guide for information on the configuration commands.
Configuration Mode chapter in this guide for information on the configuration commands.
This command configures a mandatory parameter in the configuration of the peer server.
Important
Product
SGSN
HNB-GW
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > SS7 Routing Domain Configuration > Peer-Server Configuration
configure > ss7-routing-domain rd_id variant variant_type > peer-server id server_id
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-ss7-rd-
ss7rd_id
-ps-id-peer-
server_id
)#
Syntax Description
[ no ] psp instance id
no
Removes the PSP instance from the peer server configuration.
id
id Uniquely identifies the specific peer-server-process configuration. The Id must be an integer from 1 to 4
or for SGSN with Release 15.0 or higher, the value range is 1 to12.
or for SGSN with Release 15.0 or higher, the value range is 1 to12.
Usage Guidelines
Use this command to define the peer-server-process (PSP) instance ID number for the SGSN configuration.
Examples
Use this command to create instance #3 for the PSP configuration:
psp instance 3
psp instance 3
Command Line Interface Reference, Modes I - Q, StarOS Release 19
1654
Peer-Server Configuration Mode Commands
psp