Cisco Cisco Packet Data Gateway (PDG)
shutdown
Disables/enables traffic over the current VLAN.
Product
SGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > ATM Port Configuration > PVC Configuration
configure > port atm slot_number/port_number > pvc vpi vpi_number vci vci_number
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-port-
slot_number/port_number
-pvc-
pvc_number/vci_number
)#
Syntax Description
shutdown
no shutdown
no shutdown
no
Enables the VLAN. When omitted the VLAN is non-functional.
Usage Guidelines
Enables/ Disables specified VLAN.
This command is necessary to bring a VLAN into service by enabling it via the no keyword.
Examples
To disable a VLAN from sending or receiving network traffic use the following command:
shutdown
shutdown
To enable a VLAN use the following command:
no shutdown
no shutdown
Command Line Interface Reference, Modes I - Q, StarOS Release 19
1759
PVC Configuration Mode Commands
shutdown