Cisco Cisco Packet Data Gateway (PDG)
bind
Binds the service to a logical IP interface serving as the S2a (HSGW, SaMOG) or S5/S8 (S-GW) interface
and specifies the maximum number of subscribers that can access this service over the configured interface.
and specifies the maximum number of subscribers that can access this service over the configured interface.
Product
HSGW
S-GW
SaMOG
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > MAG Service Configuration
configure > context context_name > mag-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-mag-service)#
Syntax Description
bind { address ipv6_address | ipv4-address ipv4_address } [ max-subscribers num ]
no bind address
no bind address
no
Removes the interface binding from this service.
address ipv6_address
Specifies the IPv6 address of the interface configured as the S5/S8 interface.
ipv6_address is specified in IPv6 colon-separated-hexadecimal notation.
ipv4-address ipv4_address
Specifies the IPv4 address of the interface configured as the S2a or S5/S8 interface.
The SaMOG PMIPv6-based S2a interface currently supports IPv4 bind address only.
Important
ipv4_address is specified in IPv4 colon-separated-hexadecimal notation.
max-subscribers num
Default: 1500000
Command Line Interface Reference, Modes I - Q, StarOS Release 19
729
MAG Service Configuration Mode Commands
bind