Cisco Cisco Packet Data Gateway (PDG)
local-cause-code-mapping vlr-down
Configures the cause code to send in a ATTACH ACCEPT or TAU ACCEPT to a UE that attachment to the
VLR has failed because a VLR down condition is present.
VLR has failed because a VLR down condition is present.
Product
MME
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-mme-service)#
Syntax Description
local-cause-code-mapping vlr-down emm-cause-code { congestion | cs-domain-unavailable |
imsi-unknown-in-hlr | msc-temp-unreachable | network-failure }
default local-cause-code-mapping vlr-down
imsi-unknown-in-hlr | msc-temp-unreachable | network-failure }
default local-cause-code-mapping vlr-down
default local-cause-code-mapping vlr-down
Returns the cause code mapping to its default value: msc-temp-unreachable.
vlr-down emm-cause-code emm_cause_code
Specifies the EPS Mobility Management (EMM) cause code to return when a VLR down condition is present.
emm_cause_code must be one of the following options:
• congestion
• cs-domain-unavailable
• imsi-unknown-in-hlr
• msc-temp-unreachable- Default.
• network-failure
Command Line Interface Reference, Modes I - Q, StarOS Release 19
926
MME Service Configuration Mode Commands
local-cause-code-mapping vlr-down