Cisco Cisco Packet Data Gateway (PDG)
peer-sgsn rnc-id
Statically configures Radio Network Controller Identification (RNC-ID) parameters of the peer SGSN
environment to facilitate MME-SGSN relocations over S3 or Gn/Gp interfaces.
environment to facilitate MME-SGSN relocations over S3 or Gn/Gp interfaces.
Product
MME
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-mme-service)#
Syntax Description
peer-sgsn rnc-id mcc mcc_value mnc mnc_value rnc value address ip_address capability [ gn ] [ gp ] [
s16 ] [ s3 ]
no peer-sgsn rnc-id mcc mcc_value mnc mnc_value rnc value
s16 ] [ s3 ]
no peer-sgsn rnc-id mcc mcc_value mnc mnc_value rnc value
no
Deletes the specified peer-SGSN RAI parameter configuration from the MME Service configuration.
mcc mcc_value
Specifies the mobile country code (MCC) portion of the PLMN identifier as an integer from 100 through 999.
mnc mnc_value
Specifies the mobile network code (MNC) portion of the PLMN identifier as a 2- or 3-digit integer from 00
through 999.
through 999.
rnc value
Specifies the Radio Network Controller (RNC) identification number used to facilitate a lookup for a specific
peer SGSN as an integer from 0 through 65535.
peer SGSN as an integer from 0 through 65535.
address ip_address
Specifies an existing IP address of the peer SGSN in IPv4 dotted-decimal or IPv6 colon-separated-hexadecimal
notation.
notation.
Command Line Interface Reference, Modes I - Q, StarOS Release 19
953
MME Service Configuration Mode Commands
peer-sgsn rnc-id