Cisco Cisco Packet Data Gateway (PDG)
show dhcpv6-client-profile
Displays configuration information for a specific or all Dynamic Host Configuration Protocol IPv6 (DHCPv6)
client profiles.
client profiles.
Product
GGSN
ASN-GW
P-GW
SAEGW
Privilege
Security Administrator, Administrator, Operator, Inspector
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
show dhcpv6-client-profile [ all | name profile_name ] | { grep grep_options | more }
all
Displays configuration information for all DHCPv6 client profiles.
name profile_name
Displays profile configuration information for an existing DHCPv6 client profile specified as an alphanumeric
string of 1 through 63 characters.
string of 1 through 63 characters.
| { grep grep_options | more }
Pipes (sends) the output of this command to a specified command. You must specify a command to which
the output of this command will be sent.
the output of this command will be sent.
For details on the usage of grep and more, refer to the Regulating a Command's Output section of the Command
Line Interface Overview chapter in the Command Line Interface Reference.
Line Interface Overview chapter in the Command Line Interface Reference.
Usage Guidelines
Use this command to display configuration information for one or all DHCPv6 client profiles.
Examples
The following command displays all DHCPv6 client profiles:
show dhcpv6-client-profile all
show dhcpv6-client-profile all
Command Line Interface Reference, Modes E - F, StarOS Release 19
1038
Exec Mode show Commands (D-G)
show dhcpv6-client-profile