Cisco Cisco Packet Data Gateway (PDG)
include-imsi
Enables inclusion of the IMSI in the TCAP message.
Product
SGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > SGSN Global Configuration > EIR Profile Configuration
configure > sgsn-global > eir-profile eir_profile_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-eir-profile-
eir_profile_name
)#
Syntax Description
[ no ] include-imsi
no
Disables inclusion of the IMSI in the message sent to initiate the 'check IMEI' procedure.
Usage Guidelines
This command enables/disables inclusion of the IMSI in the message to enable IMSI checking during the
IMEI check procedure. By default, IMSI checking is not included.
IMEI check procedure. By default, IMSI checking is not included.
Examples
The following example configures IMSI checking during the 'check IMEI' procedure:
check-imsi
check-imsi
Command Line Interface Reference, Modes E - F, StarOS Release 19
86
EIR Profile Configuration Mode Commands
include-imsi