Cisco Cisco Packet Data Gateway (PDG)
show ip bgp
Displays Border Gateway Protocol (BGP) information for the current context.
Product
HA
Privilege
Security Administrator, Administrator, Operator, Inspector
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
show ip bgp [ ip_address/mask | debugging | filter-list list_name | neighbors [ ip_address ] | route-map
map_name | vpnv4 [ all [ ip_address/mask | neighbors | summary ] | route-distinguisher { ipv4_address
| asn_value } rd_value | vrf vrf_name [ ip_address/mask | neighbors | summary ] | vpnv6 [ all [
ipv4_ddress | neighbors | summary ] | route-distinguisher { ipv4_address | asn_value } rd_value | vrf
vrf-name [ ip_address/mask | neighbors | summary ] ] [ | { grep grep_options | more } ]
ip_address/mask
Specifies the IP address and netmask bits for the network for which information should be displayed. The IP
address and mask is the number of subnet bits, representing a subnet mask in CIDR notation. These must be
entered in the IPv4 dotted-decimal or IPv6 colon-separated-hexadecimal CIDR notation.
address and mask is the number of subnet bits, representing a subnet mask in CIDR notation. These must be
entered in the IPv4 dotted-decimal or IPv6 colon-separated-hexadecimal CIDR notation.
debugging
Displays debug flags that are enabled.
filter-list list_name
Displays routes that match the specified filter list.
neighbors [ip_address]
Displays information for all neighbors or a neighbor specified as an IP address in IPv4 dotted-decimal or IPv6
colon-separated-hexadecimal notation.
colon-separated-hexadecimal notation.
route-map map_name
Displays routes that match the specified route-map.
Command Line Interface Reference, Modes E - F, StarOS Release 19
1189
Exec Mode show Commands (H-L)
show ip bgp