Cisco Cisco Packet Data Gateway (PDG)
show mpls ftn
Displays MPLS FEC-to-NHLFE (FTN) table information.
Product
GGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
show mpls ftn [ vrf vrf_name ] [ | { grep grep_options | more } ]
vrf vrf_name
Displays FTN information for the Virtual Routing and Forwarding (VRF) specified as an alphanumeric string
of 1 through 63 characters.
of 1 through 63 characters.
| { grep grep_options | more }
Pipes (sends) the output of the command to the command specified. You must specify a command to which
the output will be sent.
the output will be sent.
For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section
in the Command Line Interface Overview chapter.
in the Command Line Interface Overview chapter.
Usage Guidelines
This command displays MPLS FEC (Forward Error Correction)-to-NHLFE (Next-Hop label Forwarding
Entry) table information.
Entry) table information.
Examples
The following command displays MPLS FTN information:
show mpls ftn
show mpls ftn
Output descriptions for these commands are available in the Statistics and Counters Reference.
Important
Command Line Interface Reference, Modes E - F, StarOS Release 19
1327
Exec Mode show Commands (M-P)
show mpls ftn