Cisco Cisco Packet Data Gateway (PDG)
show sctp-param-template
Displays configuration information for Stream Control Transmission Protocol (SCTP) parameter templates
configured on this system.
configured on this system.
Product
MME
Privilege
Inspector
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
show sctp-param-template { all | name template_name } [ | { grep grep_options | more } ]
all
Displays configuration information for all SCTP parameter templates configured on this system.
name template_name
Displays configuration information for an existing SCTP parameter template specified as an alphanumeric
string of 1 through 63 characters.
string of 1 through 63 characters.
| { grep grep_options | more }
Pipes (sends) the output of the command to the command specified. You must specify a command to which
the output will be sent.
the output will be sent.
For details on the usage of the grep and more commands, refer to the Regulating a Command's Output section
of the Command Line Interface Overview chapter.
of the Command Line Interface Overview chapter.
Usage Guidelines
Use this command to view configuration information for SCTP parameter templates on this system.
Examples
The following command displays configured parameters for an SCTP parameter template named sctp_pt3:
show sctp-param-template name sctp_pt3
show sctp-param-template name sctp_pt3
Command Line Interface Reference, Modes E - F, StarOS Release 19
1457
Exec Mode show Commands (Q-S)
show sctp-param-template