Cisco Cisco Packet Data Gateway (PDG)
nat pkts-drop
This command is used to configure the EDR format in which records for dropped NAT packets will be saved
and the time interval for EDR generation.
and the time interval for EDR generation.
Product
NAT
Privilege
Security Administrator, Administrator
Command Modes
Exec > ACS Configuration > Firewall-and-NAT Policy Configuration
active-charging service service_name > fw-and-nat policy policy_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-fw-and-nat-policy)#
Syntax Description
nat pkts-drop { edr-format edr_format_name | timeout timeout_value }
{ default | no } nat pkts-drop { edr-format | timeout }
{ default | no } nat pkts-drop { edr-format | timeout }
default
Configures the default setting.
Default: Disables the configuration. Same as no nat pkts-drop { edr-format | timeout } command.
no
Disables the configured EDR format in which records for dropped NAT packets will be saved and the time
interval for EDR generation.
interval for EDR generation.
edr-format edr_format_name
Specifies the Event Data Record (EDR) format name.
edr_format_name must be an alphanumeric string of 1 through 63 characters.
timeout timeout_value
Specifies the NAT packet drop EDR timeout in seconds.
timeout_value must be an integer from 1 through 86400.
Usage Guidelines
Use this command to configure the EDR format in which records for dropped NAT packets will be saved and
the time interval for EDR generation.
the time interval for EDR generation.
Command Line Interface Reference, Modes E - F, StarOS Release 19
1722
Firewall-and-NAT Policy Configuration Mode Commands
nat pkts-drop