Cisco Cisco Packet Data Gateway (PDG)

Pagina di 1824
ipv6 router advertisement
Enables or disables the system to send IPv6 router advertisements.
Product
PDSN
HA
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > Ethernet Interface Configuration
configure > context context_name > interface interface_name broadcast
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-if-eth)#
Syntax Description
[ no ] ipv6 router advertisement
Usage Guidelines
Enables sending of router advertisements on the interface. All of the pool prefixes in the context (belonging
to the interface) will be advertised in the router advertisement.
The router-lifetime in the advertisement is sent as 0 to indicate to the receiver that the sender cannot be a
default-router. For all the prefixes (pools), the valid and preferred lifetime are sent as default. The
router-advertisement is sent every 600 seconds.
If the pool-prefix is deleted, then an router-advertisement is sent for that particular prefix with the valid and
preferred time set to 0.
Command Line Interface Reference, Modes E - F, StarOS Release 19    
147
Ethernet Interface Configuration Mode Commands
ipv6 router advertisement