Cisco Cisco Packet Data Gateway (PDG)
ingress-mode
Labels this port as an ingress port (incoming traffic).
Product
IPSG
SaMOG
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Ethernet Port Configuration
configure > port ethernet slot_number/port_number
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-port-
slot_number/port_number
)#
Syntax Description
[ no ] ingress-mode
no
Disables ingress port tag.
Usage Guidelines
Use this command to label this port in order for the session manager to recognize the interface from which
IP data packets are being received. This command should be used in single context configurations. In single
context configurations, the ingress port can only be identified if labeled.
IP data packets are being received. This command should be used in single context configurations. In single
context configurations, the ingress port can only be identified if labeled.
It is recommended to enable the ingress-mode configuration for IPv6 traffic to avoid packet drops.
Important
Command Line Interface Reference, Modes E - F, StarOS Release 19
166
Ethernet Port Configuration Mode Commands
ingress-mode