Cisco Cisco Packet Data Gateway (PDG)
snmp trap link-status
Enables or disables the generation of an SNMP trap for link status changes.
Product
All
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Ethernet Port Configuration
configure > port ethernet slot_number/port_number
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-port-
slot_number/port_number
)#
Syntax Description
[ no ] snmp trap link-status
no
Disables the sending of traps for link status changes.
Usage Guidelines
Enable link status change traps when a monitoring facility can use the information or if there are troubleshooting
activities in progress.
activities in progress.
Examples
Use the following command to disable sending of traps:
no snmp trap link-status
no snmp trap link-status
Command Line Interface Reference, Modes E - F, StarOS Release 19
177
Ethernet Port Configuration Mode Commands
snmp trap link-status