Cisco Cisco Packet Data Gateway (PDG)
clear crypto
Clears crypto associations or crypto statistics.
Product
ePDG
PDSN
HA
GGSN
PDG/TTG
PDIF
SCM
Privilege
Security Administrator, Administrator, Operator
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
clear crypto { isakmp [ tag map_name | peer peer_ip ] | security-association { counters tag map_name [
tx | rx ] | tag map_name | peer peer_ip[ sa-index numbr ] } | statistics { ikev2 } [service-ip-address
ip-address | service-name name ] }
tx | rx ] | tag map_name | peer peer_ip[ sa-index numbr ] } | statistics { ikev2 } [service-ip-address
ip-address | service-name name ] }
isakmp [ tag map_name | peer peer_ip ]
When no keywords are specified, this command clears all of the ISAKMP security associations for the current
context.
context.
tag map_name: Clears the ISAKMP SAs for the specified crypto map. map_name is the name of an existing
crypto map.
crypto map.
peer peer_ip: Deletes the ISAKMP SAs for the specified peer. peer_ip must be entered in IPv4 dotted-decimal
or IPv6 colon-separated-hexadecimal notation.
or IPv6 colon-separated-hexadecimal notation.
security-association { counters map map_name [ tx | rx ] | tag map_name | peer peer_ip [ sa-index numbr
] }
] }
counters tag map_name [ tx | rx ]: Resets the counters for the specified crypto map. map_name is the name
of an existing crypto map. tx specifies that only the transmit SA counters are reset. rx specifies that only the
receive SA counters are reset. If neither tx or rx are specified, both transmit and receive SA counters are reset.
of an existing crypto map. tx specifies that only the transmit SA counters are reset. rx specifies that only the
receive SA counters are reset. If neither tx or rx are specified, both transmit and receive SA counters are reset.
Command Line Interface Reference, Modes E - F, StarOS Release 19
285
Exec Mode Commands (A-C)
clear crypto