Cisco Cisco Packet Data Gateway (PDG)
clear nat-ip
Clears the NAT IP addresses forcibly from NAT pools.
Product
NAT
Privilege
Security Administrator, Administrator, Operator
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
clear nat-ip { ip_address | pool pool_name } context context_name [ -noconfirm ]
ip_address
Specifies the NAT IP address to be released from subscribers, in IPv4 dotted-decimal notation.
pool pool_name
Specifies the NAT pool name, that is an existing IP pool or IP pool group, specified as an alphanumeric string
of 1 through 31 characters.
of 1 through 31 characters.
context context_name
Clears statistics for the VPN context name where the NAT pool belongs to, specified as an alphanumeric
string of 1 through 79 characters.
string of 1 through 79 characters.
-noconfirm
Executes the command without any additional prompt and confirmation from the user.
Usage Guidelines
Use this command to clear the NAT IP addresses from Session Manager to VPN for NAT pools, by forcibly
releasing the IP addresses from the subscriber calls.
releasing the IP addresses from the subscriber calls.
Examples
The following command clears the NAT IP statistics for the configured IP address 1.1.1.1 in the test123 VPN
context:
clear nat-ip 1.1.1.1 context test123
context:
clear nat-ip 1.1.1.1 context test123
Command Line Interface Reference, Modes E - F, StarOS Release 19
373
Exec Mode Commands (A-C)
clear nat-ip