Cisco Cisco Packet Data Gateway (PDG)
show aps
Displays information for configured Automatic Protection Switching (APS) parameters.
Product
SGSN
Privilege
Inspector
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
show aps { all | card-stats slot_number [ clear ] | info slot_number/port_number | port-stats
slot_number/port_number [ clear ] | port-status } [ | { grep grep_options | more } ]
slot_number/port_number [ clear ] | port-status } [ | { grep grep_options | more } ]
all
Lists APS information for all cards configured with APS.
card-statsslot_number [ clear ]
Displays the APS statistics for the identified card. If the clear keyword is included with the command, the
APS statistics for the specified card are cleared (reset to zero).
APS statistics for the specified card are cleared (reset to zero).
slot_number is an integer that identifies the chassis slot holding the card.
infoslot_number/port_number
Displays APS information for a specific port.
slot_number/port_number: The first number must be an integer that identifies the chassis slot holding the
specified card. The slot number must be followed by a slash '/', which must be followed immediately by the
port number - an integer from 1 to 4 depending upon the type of card.
specified card. The slot number must be followed by a slash '/', which must be followed immediately by the
port number - an integer from 1 to 4 depending upon the type of card.
port-statsslot_number/port_number [ clear ]
Displays APS statistics for a specific port. If the clear keyword is included with the command then the APS
statistics for the specified port are cleared (reset to zero).
statistics for the specified port are cleared (reset to zero).
slot_number/port_number: The first number must be an integer from 1 to 48 to identify the chassis slot holding
the specified card. The slot number must be followed by a slash '/', which must be followed immediately by
the port number - an integer from 1 to 4 depending upon the type of card.
the specified card. The slot number must be followed by a slash '/', which must be followed immediately by
the port number - an integer from 1 to 4 depending upon the type of card.
Command Line Interface Reference, Modes E - F, StarOS Release 19
892
Exec Mode show Commands (A-C)
show aps