Cisco Cisco Packet Data Gateway (PDG)
gtpc
Configure the GPRS Tunneling Protocol Control (GTP-C) plane settings for this service.
Product
ePDG
MME
P-GW
S-GW
SAEGW
SaMOG
SGSN
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > eGTP Service Configuration
configure > context context_name > egtp-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-egtp-service)#
Syntax Description
no gtpc { allow-on-congestion { apn-name apn_name | arp priority_level } | bind { ipv4-address ipv4_address
[ ipv6-address ipv6_address ] | ipv6-address ipv6_address [ ipv4-address ipv4_address ] } | echo-interval
| error-response-handling | node-feature { network-triggered-service-restoration | pgw-restart-notification
} | path-failure detection-policy | private-extension overcharge-protection | reject s2b-ho-no-context }
default gtpc { echo-interval | echo-max-retransmissons | echo-retransmission-timeout | ip qos-dscp |
max-retransmissions | node-feature { network-triggered-service-restoration | pgw-restart-notification
} | path-failure detection-policy | retransmission-timeout | retransmission-timeout-ms }
max-retransmissions | node-feature { network-triggered-service-restoration | pgw-restart-notification
} | path-failure detection-policy | retransmission-timeout | retransmission-timeout-ms }
no
Disables or removes the configured GTP-C setting.
default
Resets the specified parameter to its default value.
Command Line Interface Reference, Modes E - F, StarOS Release 19
66
eGTP Service Configuration Mode Commands
gtpc