Cisco Cisco ASR 5000
Call Control Profile Configuration Mode
sgsn-core-nw-interface ▀
Command Line Interface Reference, StarOS Release 18 ▄
2103
sgsn-core-nw-interface
This command enables operators to select the Gn interface or the S4 interface for EPC capable UEs and Non-EPC
capable UEs on the S4-SGSN.
capable UEs on the S4-SGSN.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
sgsn-core-nw-interface { gn | s4 [epc-ue {always | eps-subscribed} non-epc-ue {never |
always | eps-subscribed }] }
always | eps-subscribed }] }
sgsn-core-nw-interface { gn | s4 }
Specifies the interface that EPC-capable UEs will use to communicate wit the packet core gateways
(GGSN/SGW). Selection must be one of:
(GGSN/SGW). Selection must be one of:
gn
: Forces the SGSN to forcefully select the Gn interface for EPC-capable UEs.
s4
: Specifies that the SGSN will use the S4 interface between the S4-SGSN and packet core gateways
(GGSN/SGW). This is the default setting for EPC-capable UEs.
epc-ue
Configures the S4 Interface Selection Option for EPC Capable UE.
non-epc-ue
Configures the S4 Interface Selection Option for Non-EPC Capable UE.
always
Instructs the SGSN to always choose a S4 Interface.
never
Instructs the SGSN to not choose a S4 Interface.
eps-subscribed
Instructs the SGSN to choose a S4 Interface if EPS Subscription is available.
Usage
Use this command to forcefully select the interface that the SGSN will use for EPC-capable UEs.
This command is available only if the SGSN S4 Interface license is enabled on the SGSN.
This command is available only if the SGSN S4 Interface license is enabled on the SGSN.