Cisco Cisco ASR 5000
Ethernet Interface Configuration Mode Commands
▀ port-switch-on-L3-fail
▄ Command Line Interface Reference, StarOS Release 18
3756
Usage
Use this command to monitor a destination in your network to test for L3 connectivity. The destination being
monitored should be reachable from both the active and standby line cards.
monitored should be reachable from both the active and standby line cards.
Example
The following command enables port switchover on connectivity failure to the IP address
192.168.10.100
using default values:
port-switch-on-L3-fail address 192.168.10.100
The following command disables port switchover on connectivity failure:
no port-switch-on-L3-fail