Cisco Cisco Packet Data Gateway (PDG)
Call Control Profile Configuration Mode
▀ mobility-protocol
▄ Command Line Interface Reference, StarOS Release 18
2044
mobility-protocol
This command allows you to configure the default mobility protocol type to be used for setting up a call when the AAA
server forwards an IP address directly.
server forwards an IP address directly.
Product
SaMOG
Privilege
Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
mobility-protocol { GTPv1 | GTPv2 | pmip }
default mobility-protocol
default
Sets the mobility-protocol configuration to its default values.
Default (SaMOG 3G license): GTPv1
Default (SaMOG Mixed Mode license): GTPv2
Default (SaMOG 3G license): GTPv1
Default (SaMOG Mixed Mode license): GTPv2
Usage
Use this command to configure the default mobility protocol type to be used for setting up a call when the
AAA server forwards an IP address directly. If the mobility protocol is also configured in the APN Profile
Configuration Mode, the value configured here will be overridden with the configured value in the APN
profile.
AAA server forwards an IP address directly. If the mobility protocol is also configured in the APN Profile
Configuration Mode, the value configured here will be overridden with the configured value in the APN
profile.
Example
The following command configures mobility protocol to GTPv2:
mobility-protocol GTPv2