Cisco Cisco Packet Data Gateway (PDG)
Context Configuration Mode Commands E-H
▀ gtpp transport-layer
▄ Command Line Interface Reference, StarOS Release 18
2514
gtpp transport-layer
Selects the transport layer protocol for the Ga interface for communication between the access gateways (GSNs) and
GTPP servers.
GTPP servers.
Product
GGSN
P-GW
SAEGW
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
gtpp transport-layer { tcp | udp }
default gtpp transport-layer
default
Configures this command with the default setting.
Default:
Default:
udp
tcp
Default: Disabled
Enables the system to implement TCP as transport layer protocol for communication with GTPP server.
Enables the system to implement TCP as transport layer protocol for communication with GTPP server.
udp
Default: Enabled
Enables the system to implement UDP as transport layer protocol for communication with GTPP server.
Enables the system to implement UDP as transport layer protocol for communication with GTPP server.
Usage
Use this command to select the TCP or UDP as the transport layer protocol for Ga interface communication
between GTPP servers and AGWs (GSNs).
between GTPP servers and AGWs (GSNs).
Example
The following command enables TCP as the transport layer protocol for the GSN’s Ga interface.
gtpp transport-layer tcp