Cisco Cisco Packet Data Gateway (PDG)
CSCF Service Configuration Mode Commands
▀ emergency-cscf
▄ Command Line Interface Reference, StarOS Release 18
3310
emergency-cscf
Enables the Emergency-CSCF for the service and enters the Emergency-CSCF Configuration Mode. Default is disabled.
Product
SCM
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > CSCF Service Configuration
configure > context context_name > cscf service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-cscf-service)#
Syntax
[ no ] emergency-cscf
no
Disables the E-CSCF for the service.
Usage
Use this command to enable the Emergency-CSCF feature and enter the Emergency-CSCF Configuration
Mode.
Entering this command results in the following prompt:
Mode.
Entering this command results in the following prompt:
[context_name]hostname(config-cscf-service-emergency-cscf)#
Emergency-CSCF Configuration Mode commands are defined in the CSCF Emergency-CSCF Configuration
Mode Commands chapter in this guide.
Mode Commands chapter in this guide.
Important:
Only one function (P-CSCF, S-CSCF, E-CSCF, SIP Proxy, or A-BG) can be enabled per service.