Cisco Cisco Packet Data Gateway (PDG)
CSCF Service Configuration Mode Commands
▀ serving-cscf
▄ Command Line Interface Reference, StarOS Release 18
3342
serving-cscf
Enables Serving-CSCF for the service and enters the Serving-CSCF Command Mode. Default is disabled.
Product
SCM (S-CSCF)
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > CSCF Service Configuration
configure > context context_name > cscf service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-cscf-service)#
Syntax
[ no ] serving-cscf
no
Disables S-CSCF for the service.
Usage
Use this command to enable the Serving-CSCF feature and enter the Serving-CSCF Configuration Mode.
Entering this command results in the following prompt:
Entering this command results in the following prompt:
[context_name]hostname(config-cscf-service-serving-cscf)#
Serving-CSCF Configuration Mode commands are defined in the CSCF Serving-CSCF Configuration Mode
Commands chapter in this guide.
Commands chapter in this guide.
Important:
The Serving-CSCF is a license-enabled function of the Session Control Manager. Only one function
(P-CSCF, S-CSCF, E-CSCF, SIP Proxy, or A-BG) can be enabled per service.