Cisco Cisco Packet Data Gateway (PDG)
LTE Forbidden Location Area Configuration Mode Commands
▀ lac
▄ Command Line Interface Reference, StarOS Release 18
7102
lac
Configures a 3G location area code (LAC) or area codes where a UE, associated with this LTE policy, is restricted from
participating in a handover scenario.
participating in a handover scenario.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > LTE Policy Configuration > LTE HO Restriction List Configuration > LTE Forbidden
Location Area Configuration
Location Area Configuration
configure > lte-policy > ho-restrict-list list_name > forbidden location-area plmnid
plmn_id
plmn_id
Entering the above command sequence results in the following prompt:
[local]host_name(forbidden_la)#
Syntax
[ no ] lac { area_code } +
no
Removes a configured forbidden handover area code or area codes from this policy. If no location area code
is specified, then all location area codes are removed.
is specified, then all location area codes are removed.
area_code
Specifies an area code or area codes from which UEs are restricted from participating in a handover as an
integer from 0 through 65535. Multiple area codes can be entered (up to 128 in a single line, separated by
spaces).
integer from 0 through 65535. Multiple area codes can be entered (up to 128 in a single line, separated by
spaces).
Usage
Use this command to configure 3G location-based area codes that will be forbidden to UEs associated with
this LTE policy.
this LTE policy.
Example
The following command configures eight location-based area codes (1, 2, 3, 4, 5, 6, 7, 8) where a UE,
associated with this LTE policy, is restricted from participating in a handover scenario:
associated with this LTE policy, is restricted from participating in a handover scenario:
lac 1 2 3 4 5 6 7 8