Cisco Cisco Packet Data Gateway (PDG)
MME Service Configuration Mode Commands
msc ▀
Command Line Interface Reference, StarOS Release 18 ▄
7367
msc
Creates and manages an Mobile Switching Center (MSC) server configuration, for the MME service, for an MSC
enhanced with Single Radio Voice Call Continuity (SRVCC). The MSC server acts as an endpoint for the Sv interface.
enhanced with Single Radio Voice Call Continuity (SRVCC). The MSC server acts as an endpoint for the Sv interface.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mme-service)#
Syntax
msc { msc_name | [ ipv4_address | ipv6_address ] } [ ip-address [ ipv4_address |
ipv6_address ] [ offline | online ]
ipv6_address ] [ offline | online ]
no msc { msc_name | [ ipv4_address | ipv6_address ] }
no msc_name
Removes the MSC configuration from the MME service.
msc_name
Specifies a name for this peer MSC server.
msc_name
must be an alphanumeric string from 1 to 63 characters.
ip-address ipv4_address | ipv6_address
Specifies the IP address of the peer MSC server in either IPv4 dotted-decimal or IPv6 colon-separated-
hexadecimal notation.
In Release 16.0 and higher, the MME supports DNS-based MSC selection. If DNS-based selection is
configured, the DNS lookup is done first, then it will fall back to local ip address.
hexadecimal notation.
In Release 16.0 and higher, the MME supports DNS-based MSC selection. If DNS-based selection is
configured, the DNS lookup is done first, then it will fall back to local ip address.
offline
Mark this MSC server offline for maintenance. Once this command is issued, the MME will no longer send
future handover requests to this MSC server. No GTPv2 messages are generated when offline/online mode is
changed.
Once the MSC server is set for offline, the
future handover requests to this MSC server. No GTPv2 messages are generated when offline/online mode is
changed.
Once the MSC server is set for offline, the
online
keyword must be used to return the server to online mode.
online
Mark this MSC server for online mode. Once this command is issued, the MSC server is added back into the
MSC selection algorithm and normal operation is returned. By default, an MSC server is online unless the
MSC selection algorithm and normal operation is returned. By default, an MSC server is online unless the
offline
keyword is specified.