Cisco Cisco Packet Data Gateway (PDG)
MME Service Configuration Mode Commands
policy sctp-down ▀
Command Line Interface Reference, StarOS Release 18 ▄
7397
policy sctp-down
Configures how the MME responds to a failure of the Stream Control Transmission Protocol (SCTP) connection from
the eNodeB.
the eNodeB.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mme-service)#
Syntax
policy sctp-down { detach-ue | idle-mode-entry }
default policy sctp-down
default
Returns the command to its default setting of
idle-mode-entry
.
detach-ue
detach-ue
: Specifies that UEs are to be detached from the service when the SCTP connection from the
eNodeB fails.
idle-mode-entry
idle-mode-entry
: Specifies that UEs are to be placed into an idle mode condition when the SCTP
connection from the eNodeB fails.
Usage
Use this command to configure how the MME reacts to an SCTP connection failure condition.
Example
The following command configures the MME to place UEs into an idle state while the SCTP connection
from the eNodeB fails:
from the eNodeB fails:
policy sctp-down idle-mode-entry