Cisco Cisco Packet Data Gateway (PDG)
MME Service Configuration Mode Commands
▀ setup-timeout
▄ Command Line Interface Reference, StarOS Release 18
7414
setup-timeout
Configures the timeout duration for setting up MME calls in this MME service.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mme-service)#
Syntax
setup-timeout dur
default setup-timeout
default
Sets the call setup timeout duration to the default value of 60 seconds.
dur
Specifies the call setup timeout duration (in seconds) for MME calls after which the attempt will be
discarded.
discarded.
dur
is an integer from 1 through 10000. Default: 60
Usage
Use this command to configured the timeout duration for setting up an MME call with an MME service. One
this timer expires, the call setup procedure will be discarded within this MME service.
this timer expires, the call setup procedure will be discarded within this MME service.
Example
The following command sets the default setup timeout duration of 60 seconds for MME calls:
default setup-timeout