Cisco Cisco Packet Data Gateway (PDG)
PCC-TimeDef Configuration Mode Commands
▀ time-slot
▄ Command Line Interface Reference, StarOS Release 18
7872
Following days are used as
end_weekdays
:
friday
specifies Friday of the week as end day.
monday
specifies Monday of the week as end day.
saturday
specifies Saturday of the week as end day.
sunday
specifies Sunday of the week as end day.
thrusday
specifies Thursday of the week as end day.
tuesday
specifies Tuesday of the week as end day.
wednesday
specifies Wednesday of the week as end day.
time
end_time
Specifies the end time
end_time
in
HH
MIN
SS
format.
Following format is used for
HH
MIN
SS
in
end_time
:
HH
specifies the hour of the end day in 24 hour format and must be an integer between 00 through 23.
MIN
specifies the minutes of the hour of the end day must be an integer between 00 through 59.
SS
specifies the seconds of the minute of the end day must be an integer between 00 through 59.
time
start_time
Specifies the start time
start_time
in
HH
MIN
SS
format.
Following format is used for
HH
MIN
SS
in
start_time
:
HH
specifies the hour of the day in 24 hour format and must be an integer between 00 through 23.
MIN
specifies the minutes of the hour of the day must be an integer between 00 through 59.
SS
specifies the seconds of the minute of the day must be an integer between 00 through 59.
end
time
end_time
Specifies the end time
end_time
in
HH
MIN
SS
format.
Following format is used for
HH
MIN
SS
in
end_time
:
HH
specifies the end hour of the day in 24 hour format and must be an integer between 00 through 23.
MIN
specifies the minutes of the end hour of the day must be an integer between 00 through 59.
SS
specifies the seconds of the minute of the end hour must be an integer between 00 through 59.
Usage
Use this command to define a time slot with a start day, start time, and start date optiion for an event to
trigger a procedure or condition in an IP-CAN session. A maximum of 12 time-slots can be configured
through this command.
trigger a procedure or condition in an IP-CAN session. A maximum of 12 time-slots can be configured
through this command.
Example
The following command defines a time slot 2 which will start on Friday at 00:30:00 and ends on Saturday at
23:00:00:
23:00:00:
start day friday start time 00 30 00 end day saturday time 23 00 00