Cisco Cisco Packet Data Interworking Function (PDIF)
MAG Service Configuration Mode Commands
▀ information-element-set
▄ Command Line Interface Reference, StarOS Release 18
7224
Important:
The information element set of mobility options for SaMOG PMIPv6-based S2a interface must be
set to
standard
. Any other configuration may result in a call setup failure.
Usage
Use this command to identify the type of information element set of mobility options to be used in PBU
messages sent form the MAG to the LMA. The mobility options can be either standards-based (3GPP 29.275)
or custom (vendor-specific as defined by 3GPP 29.275).
messages sent form the MAG to the LMA. The mobility options can be either standards-based (3GPP 29.275)
or custom (vendor-specific as defined by 3GPP 29.275).
Example
The following command identifies the information element set of mobility options to use in PBU messages as
custom:
custom:
information-element-set custom1