Cisco Cisco ASR 5700
Call Control Profile Configuration Mode
▀ integrity-algorithm-lte
▄ Command Line Interface Reference, StarOS Release 17
1972
integrity-algorithm-lte
Specifies the order of preference for using an Integrity Algorithm.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
integrity-algorithm-lte priority1 { 128-eia0 | 128-eia1 | 128-eia2 } priority2 128-eia {
0 | 1 | 2 } priority3 128-eia { 0 | 1 | 2 }
0 | 1 | 2 } priority3 128-eia { 0 | 1 | 2 }
remove integrity-algorithm-lte
remove
Deletes the priorities definition from the call control profile configuration.
priority1 128-eia { 0 | 1 | 2 }
Enter 0, 1, or 2 at the end of
128-eia
to define the algorithm being given first priority.
priority2 128-eia { 0 | 1 | 2 }
Enter 0, 1, or 2 at the end of
128-eia
to define the algorithm being given second priority.
priority3 128-eia { 0 | 1 | 2 }
Enter 0, 1, or 2 at the end of
128-eia
to define the algorithm being given third priority.
Usage
Set the order or priority in which the MME will select an integrity algorithm for use. All three priorities must
be set or the definition is invalid. The command can be re-entered to change the priorities without removing
the configuration.
be set or the definition is invalid. The command can be re-entered to change the priorities without removing
the configuration.
Example
Configure 128-EIA0 as first priority integrity algorithm:
integrity-algorithm-lte priority1 128-eia 0 priority2 128-eia 2 priority3
128-eia 1
128-eia 1