Cisco Cisco ASR 5700
Call Control Profile Configuration Mode
▀ rau-inter
▄ Command Line Interface Reference, StarOS Release 17
2052
location-area-list instance
instance
list_id
must be an integer between 1 and 5. The value must be an already defined instance of a location
area code (LAC) list created with the
location-area-list
command.
failure-code
fail-code
Specify a GSM Mobility Management (GMM) failure cause code to identify the reason an inter SGSN RAU
does not occur. This GMM cause code will be sent in the reject message to the MS.
does not occur. This GMM cause code will be sent in the reject message to the MS.
fail-code
must be an integer from 2 to 111. Refer to the GMM failure cause codes listed below (from
section 10.5.5.14 of the 3GPP TS 124.008 v7.2.0 R7):
2 - IMSI unknown in HLR
3 - Illegal MS
6 - Illegal ME
7 - GPRS services not allowed
8 - GPRS services and non-GPRS services not allowed
9 - MSID cannot be derived by the network
10 - Implicitly detached
11 - PLMN not allowed
12 - Location Area not allowed
13 - Roaming not allowed in this location area
14 - GPRS services not allowed in this PLMN
15 - No Suitable Cells In Location Area
16 -MSC temporarily not reachable
17 - Network failure
20 - MAC failure
21 - Synch failure
22 - Congestion
23 - GSM authentication unacceptable
40 - No PDP context activated
48 to 63 - retry upon entry into a new cell
95 - Semantically incorrect message
96 - Invalid mandatory information
97 - Message type non-existent or not implemented
98 - Message type not compatible with state
99 - Information element non-existent or not implemented
100 - Conditional IE error
101 - Message not compatible with the protocol state
111 - Protocol error, unspecified