Cisco Cisco ASR 5700
Exec Mode Commands (D-S)
▀ egtpc test echo
▄ Command Line Interface Reference, StarOS Release 17
4054
peer-address
ip_address
Specifies that GTP-C echo requests will be sent to a specific peer.
ip_address
must be entered using IPv4 dotted-decimal notation or IPV6 colon-separated-hexadecimal
notation.
Usage
This command tests the GGSN’s or P-GW’s ability to exchange GPRS Tunneling Protocol control plane
(GTP-C) packets with the specified peer. This command is useful for troubleshooting and/or monitoring.
This command must be executed from within the context in which the GGSN/P-GW service is configured.
(GTP-C) packets with the specified peer. This command is useful for troubleshooting and/or monitoring.
This command must be executed from within the context in which the GGSN/P-GW service is configured.
Important:
In StarOS v14.0 and later, this command replaces the
gtpv0 test echo
and
gtpc test echo
commands.
Example
The following command issues GTP-C echo packets from a GGSN service bound to address
192.168.157.43
to an SGSN with an address of
192.168.1.52
:
egtpc test echo gtp-version 1 src-address 192.168.157.43 peer-address
192.168.1.52
192.168.1.52