Cisco Cisco Packet Data Gateway (PDG)
Logical eNode Configuration Mode Commands
▀ bind s1-mme
▄ Command Line Interface Reference, StarOS Release 17
6956
bind s1-mme
Binds the pre configured Local SCTP IP Address for S1 association to MME.
Product
HeNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > HENBGW-NETWORK Service Configuration > Logical
eNodeB Configuration
eNodeB Configuration
configure > context
context_name
> henbgw-network-service
service_name
> logical-enb
global-enb-id plmn id mcc
mcc_id
mnc
mnc_id
{
home-enb-id
henb_id | macro-enb-id
menb_id
}
Entering the above command sequence results in the following prompt:
[context_name]host_name(logical-enb)#
Syntax
bind s1-mme { ipv4-address | ipv6-address }ip_addr
no bind s1-mme
no
Removes the binding of S1-MME interface from this logical eNodeB configuration.
ip_addr
Identifies the IP address of the S1-MME interface to associate with this HeNB-GW Network service.
addr_val
must be entered in the IPv4 ( dotted decimal notation) or IPv6 (: / :: notation) .
Usage
Use this command to bind the pre configured IPv4 / IPv6 address of the S1-MME interface to the logical
eNodeB.
eNodeB.
Example
Following command binds the S1-MME interface having
192:168:100:101
IP address with specific logical
eNodeB.
bind s1-mme ipv6-address 192:168:100:101