Cisco Cisco Packet Data Gateway (PDG)
MME Service Configuration Mode Commands
▀ max-bearers per-subscriber
▄ Command Line Interface Reference, StarOS Release 17
7256
max-bearers per-subscriber
Specifies the maximum number of EPS bearers that a subscriber may simultaneously use to access this MME service.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mme-service)#
Syntax
max-bearers per-subscriber max_bearer
default max-bearers per-subscriber
default
Configures the maximum EPS bearers for a subscriber to use simultaneously to the default value of 11.
max_bearer
Specifies the maximum number of EPS bearers for a subscriber may simultaneously use to access this MME
service.
service.
max_bearer
is an integer from 1 through 11. Default: 11
Usage
Use this command to set the maximum number of EPS bearers that a subscriber may simultaneously use to
access this MME service.
access this MME service.
Example
The following command specifies that a maximum of
6
simultaneous EPS bearers can be facilitated for a
subscriber at any given time:
max-bearers per-subscriber 6