Cisco Cisco Packet Data Gateway (PDG)
MME Service Configuration Mode Commands
▀ pool-area
▄ Command Line Interface Reference, StarOS Release 17
7296
pool-area
Creates an MSC server pool area for the Sv interface or specifies an existing pool area, and enters MME MSC Server
Pool Area Configuration Mode.
Pool Area Configuration Mode.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mme-service)#
Syntax
pool-area pool_area_name type { hash-value | round-robin }
no pool-area pool_area_name
no
Removes the configured pool-area for this MME service.
pool_area_name
Specifies the name of the pool-area as an alphanumeric string of 1 through 63 characters.
type { hash-value | round-robin }
Defines the MSC server selection scheme, either:
hash-value
: The MME selects the MSC server based on the result of the IMSI [(IMSI div 10) modulo
1000].
round-robin
: The MME selects the MSC server based on the round-robin scheme.
Usage
Use this command to create an MSC server pool area for the Sv interface or specify an existing pool area
configuration and enter the MME Pool Area Configuration Mode.
The command also defines the MSC server selection method for the pool area, using either the IMSI hash
value, or round-robin.
This command is also used to remove an existing pool area.
A maximum of 24 pool areas can be configured per MME service.
When configured, the MME attempts to select an MSC using the following selection order:
1. Pool area that matches the PLMN and of type hash.
2. Pool area that matches the PLMN and of type round-robin.
3. Pool area that does not have PLMN associated and of type hash.
4. Pool area that does not have PLMN associated and of type round-robin .
Entering this command results in one of the following prompts, based on the pool selection method specified:
configuration and enter the MME Pool Area Configuration Mode.
The command also defines the MSC server selection method for the pool area, using either the IMSI hash
value, or round-robin.
This command is also used to remove an existing pool area.
A maximum of 24 pool areas can be configured per MME service.
When configured, the MME attempts to select an MSC using the following selection order:
1. Pool area that matches the PLMN and of type hash.
2. Pool area that matches the PLMN and of type round-robin.
3. Pool area that does not have PLMN associated and of type hash.
4. Pool area that does not have PLMN associated and of type round-robin .
Entering this command results in one of the following prompts, based on the pool selection method specified: