Cisco Cisco Packet Data Gateway (PDG)
QoS Profile Configuration Mode Commands
▀ epc-qos-params-in-gtpv1
▄ Command Line Interface Reference, StarOS Release 17
8086
epc-qos-params-in-gtpv1
This command enables or disables the SGSN to send EPC QoS parameters to the GGSN.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Quality of Service Profile Configuration
configure > quality-of-service-profile
Entering the above command sequence results in the following prompt:
[local]host_name(qos-of-service-profile)#
Syntax
epc-qos-params-in-gtpv1 { eps-subscription | gprs-subscription }
remove epc-qos-params-in-gtpv1
remove
Removes previous configuration changes and resets the default.
eps-subscription
If the keyword
eps-subscription
is configured, the EPC QoS parameters from EPS subscription are sent
to the GGSN. (Note: This option is not supported in this release).
gprs-subscription
If the keyword
gprs-subscription
is configured, E-ARP and APN-AMBR from the GPRS subscription
are sent. The UE-AMBR value is read from the user (local capping).
Usage
This command is disabled by default. On enabling this command E-ARP and APN-AMBR parameters are
included in the GTPV1 SM messages towards the GGSN.
included in the GTPV1 SM messages towards the GGSN.
Example
The following command enables the SGSN to send EPC QoS parameters to the GGSN. The E-ARP and
APN-AMBR values are picked from the GPRS subscription and the UE-AMBR value is read from the user
(local capping).
APN-AMBR values are picked from the GPRS subscription and the UE-AMBR value is read from the user
(local capping).
epc-qos-params-in-gtpv1 gprs-subscription