Cisco Cisco Packet Data Gateway (PDG)
Radio Congestion Policy Configuration Mode Commands
▀ reporting-interval
▄ Command Line Interface Reference, StarOS Release 17
8100
reporting-interval
Configures the reporting interval in terms of the number of sampling intervals.
Product
All
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec > ACS Configuration > Radio Congestion Policy Configuration
active-charging service service_name > radio-congestion policy policy_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-radio-congestion-policy)#
Syntax
reporting-interval interval_value min-samples-required num_samples
default reporting-interval
default
Configures this command with its default setting.
reporting-intervalinterval_value
Specifies the reporting interval in seconds.
interval_value
must be a number from 1 to 60.
Default: 5 seconds
min-samples-required num_samples
Specifies the minimum number of samples required for reporting.
num_samples
must be a number from 1 to 60.
Default: 5
Usage
Use this command to configure the reporting interval in terms of the number of sampling intervals. This
indicates after how many sampling intervals, the report must be generated and reported to external entities
like PCRF if required.
indicates after how many sampling intervals, the report must be generated and reported to external entities
like PCRF if required.
Example
The following command configures the reporting interval as
10
seconds and
5
samples for a subscriber:
reporting-interval 10 min-samples-required 5