Cisco Cisco Packet Data Gateway (PDG)
RoHC Profile Compression Configuration Mode Commands
▀ use-uncomp-profile
▄ Command Line Interface Reference, StarOS Release 17
8206
use-uncomp-profile
Enables or disables the use of the Uncompressed Profile (0x0000) if required at the compressor.
Product
HSGW
PDSN
Privilege
Administrator
Mode
Exec > Global Configuration > RoHC Profile Configuration > RoHC Profile Compression Configuration
configure > rohc-profile profile-name profile_name > compression-options
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-rohcprofile-profile_name-comp)#
Syntax
[default | no ] useS-uncomp-profile
default
Returns the command to its default value of disabled.
no
Disables the use of the Uncompressed Profile.
Usage
Use this command to enable or disable the use of the Uncompressed Profile.
Example
The following command enables the use of the Uncompressed Profile.
use-uncomp-profile
The following command disables the use of the Uncompressed Profile.
no use-uncomp-profile