Cisco Cisco Packet Data Gateway (PDG)

Pagina di 8994
S-GW Service Configuration Mode Commands   
▀  associate 
 
 
▄  Command Line Interface Reference, StarOS Release 17 
8606 
   
associate 
Associates the S-GW service with QoS and policy control and charging configurations. 
Product
 
S-GW 
SAEGW 
Privilege
 
Administrator 
Mode
 
Exec > Global Configuration > Context Configuration > S-GW Service Configuration 
configure > context context_name > sgw-service service_name
 
Entering the above command sequence results in the following prompt: 
[context_name]host_name(config-sgw-service)# 
Syntax
 
associate { access-peer-map | accounting-policy name | egress-proto { gtp | gtp-pmip | 
pmip } [ egress-context 
name [ egtp-service name ] [ mag-service name ] ] | ims-auth-
service 
name | ingress egtp-service name| peer-map name | qci-qos-mapping name | 
subscriber-map
 name 
no associate { access-peer-map | accounting-policy | egress-proto [ egress-context [ 
egtp-service ] [ mag-service ] ] | ims-auth-service | ingress egtp-service | peer-map | 
qci-qos-mapping | subscriber-map }
 
no
 
Removes the specified association form the S-GW service. 
access-peer-mapname
 
Associates the access/ingress side of the peer-map to the configured S-GW service.  
name
 must be an existing peer-map expressed as an alphanumeric string of 1 through 63 characters. 
accounting-policy name
 
Associates the S-GW service with an accounting policy configured in the same context.  
name
 must be an existing accounting policy expressed as an alphanumeric string of 1 through 63 characters. 
Accounting policies are configured through the 
policy accounting
 command in the Context 
Configuration Mode. 
egress-proto { gtp | gtp-pmip | pmip } [ egress-context name [ egtp-service name 
] [ mag-service 
name ] ]
 
Associates and configures the egress protocol for this S-GW service. 
gtp
: Specifies that GTP is to be used for the S-GW service egress. 
gtp-pmip
: Specifies that either GTP or PMIP is to be used for the S-GW service egress. 
pmip
: Specifies that PMIP is to be used for the S-GW service egress. 
egress-context
 
name
: Specifies that the context in this keyword is to be used for the S-GW service egress.