Cisco Cisco Packet Data Gateway (PDG)
Subscriber Configuration Mode Commands
ipv6 secondary-address ▀
Command Line Interface Reference, StarOS Release 17 ▄
8771
ipv6 secondary-address
Configures additional IPv6 4-bit prefixes to the subscriber session.
Product
PDSN
GGSN
ASN-GW
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Subscriber Configuration
configure > context context_name > subscriber { default | name subscriber_name }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-subscriber)#
Syntax
[ no ] ipv6 secondary-address { prefix ipv6_address_prefix | prefix-pool pool_name }
no
Deletes a previously configured ipv6 secondary address.
ipv6 secondary-address
ipv6_address_pref
Specified the secondary IPv6 address using IPv6 colon-separated-hexadecimal notation.
pool_name
Specifies the name given to the secondary address prefix pool as an alphanumeric string of of 1 through 31
characters.
characters.
Usage
An IPv6 prefix pool name may be configured for a dynamic prefix, while the prefix is static. This command
may be executed multiple times to configure multiple prefixes.
may be executed multiple times to configure multiple prefixes.
Example
The following command assigns an IPv6 secondary address prefix-pool name of
eastcoast
to the
subscriber:
ipv6 secondary-address prefix-pool eastcoast